Rogue R2 & Maverick MK2 Profile Moving Heads Road Cases

 

 Intense Lighting Hire specialised in high end theatre lighting equipment hire. They recently purchased new moving heads from Chauvet and required a total of 8 road cases to house these equipment. 

They have specified Penn Elcom hardware for peace of mind. The road cases were built deeper to allow the clamps to stay on the lights while the lids are closed. 

One option for road cases housing large moving heads would be have the base of the road case come with a front open door, so that the moving heads can be lift out from  the front of the road case instead of lifting it out from the top. 

Extra long Exhibition Trade Show Road Case for Innovatio Dental

 

Innovatio Dental Supplies contacted us with an emergency. Two weeks before their trade show they have a set of custom made show stands frame structure that are extra long and needing a road case with 3.1 meters of internal clearance. 

The items to be housed have a combined total weight of 400Kg. 

A road case of more than three meters long holding such a weight requires a steel frame at its base to provide extra support. 

We have designed this road case to come with split lid for easy handling with two people.  The road case was built of 12mm plywood, and 22mm baseboard plus steel frame. All Penn Elecom hardward for the extra strength. 8 of heavy duty castors are installed to better handle the weight and make it easier to handle. Plenty of handles to grab on all sides of the road case. 10mm EVA foam are used inside the road case as lining. 

Thank you very much Innvotio Dental Supplies for your business. We look forward to work for you again on road cases that you may need for different medical equipment.