Aluminium Single Angled Edge Extrusion 3.0M 35X35MM

$16.50

This single angle extrusion provides a foundation for cases with corner edges that overlap. Made from Aluminium. This is a 3.0 meters long section. All of our extrusions can be custom cut for $1 per cut.

- +
Compare

Shield the exterior corner joints and edgings of your case with this 35X35MM extra-wide heavy-duty aluminum edge extrusions. This extrusion is recommended if you are building road cases with 12mm plywood and the case is close to or longer than 1.5M. This extrusion is made of 6063-T5 aluminium, with a thickness of 1.5mm, the extra leg length of 35MM offers better protection and reinforcement of your large road cases.

We have put together a list of matching hardware below for your convenience. If you are building a smaller case with 9mm plywood, you can choose the 30X30MM edge extrusion instead.

This single angled edge extrusion comes in 3 meters length and will be cut in half if shipping is required.  We offer to cut extrusions to sizes at an extra cost of 1+GST per cut if you can provide a list of lengths.

To make your life easier, we offer below design and cutting service so that you receive everything cut to size ready to be put together like flat-pack furniture:

  • Design and drawing: 100 to 300+GST depending on how complicated your case is.
  • Plywood panel cutting and routing: 65+GST per sheet of 1.22X2.44M
  • Foam cutting (EVA 5/10MM):65+GST per sheet of 1.5X3.0M
  • Extrusion Cutting: 65+GST

Happy building, and remember to share your finished road case with us via Facebook for a 20% discount on your next order.

Weight 0.6 kg
Dimensions 300 × 4 × 4 cm
Length

3.0m

Leg Length

35mm

Thickness

1.2mm

Material

6063-T5 Aluminium