To install this rubber foot on the underside of your road case, drill a 8mm diameter hole at the right location and put a 6mm Tee-nut in there. The tee-nut will need to be flush to the underside of your road case so you can then mount the rubber foot onto your case with a 6mm bolt.
If the case you are building does not come with corner castors then you probably won’t need a foot this tall. Instead a 15mm tall rubber foot would be suitable for a console or rack case.
|Dimensions||5 × 5 × 5 cm|
Foot: Black Rubber Washer: Steel