Shield the exterior corner joints and edgings of your case with this 35X35MM extra-wide heavy-duty aluminum edge extrusions. This extrusion is recommended if you are building road cases with 12mm plywood and the case is close to or longer than 1.5M. This extrusion is made of 6063-T5 aluminium, with a thickness of 1.5mm, the extra leg length of 35MM offers better protection and reinforcement of your large road cases.
We have put together a list of matching hardware below for your convenience. If you are building a smaller case with 9mm plywood, you can choose the 30X30MM edge extrusion instead.
- Laminated Plywood Panel 1.22X2.44MM, Thickness 12MM
- Large Ball Corner or Large Flat Corner
- Large Corner Brace
- Medium Recessed Handle
- Large Surface Mount Lid Stay
- Large Recessed Latch
- Hybrid Extrusion with 12MM Gap
- Single Angled Extrusion 35X35MM
This single angled edge extrusion comes in 1.5 meters length. We offer to cut extrusions to sizes at an extra cost of 1+GST per cut if you can provide a list of lengths.
To make your life easier, we offer below design and cutting service so that you receive everything cut to size ready to be put together like flat-pack furniture:
- Design and drawing: 100 to 300+GST depending on how complicated your case is.
- Plywood panel cutting and routing: 65+GST per sheet of 1.22X2.44M
- Foam cutting (EVA 5/10MM):65+GST per sheet of 1.5X3.0M
- Extrusion Cutting: 65+GST
Happy building, and remember to share your finished road case with us via Facebook for a 20% discount on your next order.
|Dimensions||102 × 20 × 20 cm|